Hot-selling Pipette tip supplier - Compact Modular Dry Heat Incubator – Bioendo
Hot-selling Pipette tip supplier - Compact Modular Dry Heat Incubator – Bioendo Detail:
Dry Heat Incubator
1. Product description:
Dry Heat Incubator TAL-M2 is amicroprocessor-controlled device, high precision of temperature control, samplepreparation parallelism, as an alternative to the traditional water bathdevice. It is recommended to use in the gel clot TAL endotoxin assay. And it can be widely used in various other application includes the pharmaceutical, chemical, food safety, environment, quality inspection. TAL-M2 includes 2 heating modules. TAL- M2 A Dry bath incubator Can achieve two independent heating modules, thermostats, unique combo designed to meet the needs of more experimental.
2. Product features
1, LCD display, simple interface.
2, high heating speed, uniformheating, accurate temperature control, high stability, low energy consumptionand no noise.
3, Built in temperature calibrationfunction, automatic fault detection and buzzer alarm function.
4, Built in over-temperatureprotection device, safe and reliable use, prolong the service life of themachine.
5, product design, compact and tight,small occupied space, freer and easier.
6, Various blocks for convenientreplacement, cleaning and disinfection.
7，It Can achieve two independentheating modules, thermostats, unique combo designed to meet the needs of moreexperimental.
dry bath double control, dry incubator doublemodule, limulus polyphemus blue blood, tal kinetic chromogenic method, talendotoxin kit
| Product Name & Descriptions |
TAL-M2 Dry heat incubator (single heating module); One modular total 60 holes for mass test in pharmaceuticals application. |
|
| Temperature control Range | Ambient+5℃ ~ 150℃ | |
| Temperature setting range | Ambient+5℃ ~ 150℃ | |
| Temperature rising time | ≤ 30min (from 20℃ rise to 150℃), rise to 37deg C in about 60s. | |
| Temperature Stability @100~150℃ | ≤±1℃ | |
| Temperature Stability @40~100℃ | ≤±0.5℃ | |
| Temperature Uniformity @40℃ | ±0.3℃ | |
| Modular temperature uniformity | ±0.5℃ | |
| Displayed Temperature Precision | 0.1℃ | |
| Temperature Control time | 99h59min | |
| Fuse protector | 250v, 3A/6A, Φ5×20 | |
| Highest Temperature | 150℃ | |
| Power supply | AC220V/AC110V, 50/60Hz, 400W | |
| Dimension | D260*W220*H95mm | |
Product detail pictures:
Related Product Guide:
We keep on with the basic principle of "quality to start with, support very first, continuous improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the quality objective. To great our service, we offer the items with all the superior top quality at the reasonable selling price for Hot-selling Pipette tip supplier - Compact Modular Dry Heat Incubator – Bioendo , The product will supply to all over the world, such as: Israel, Slovak Republic, Myanmar, We supply professional service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound products with good logistics service and economical cost. Depending on this, our products are sold very well in the countries in Africa, the Mid-East and Southeast Asia.
By Lesley from Cape Town - 2018.12.25 12:43
Product quality is good, quality assurance system is complete, every link can inquire and solve the problem timely!
By Elma from Turkey - 2017.02.14 13:19
Leave Your Messages
Related products
-
OEM Manufacturer BET Test Procedure - Nymph X ...
NYMPHX Nymph X Water Purification System Nymph X Water Purification System could transfer tap water into pure water and ultrapure water. Equipped with a pressure stabilizer and low flow-rate operating mode, the system can adapt to various source conditions without any extra pre-treatment necessary. The system also supports multiple water dispensing modes, and the precision of quantitative and quality-controlled dispense of water could reach ±1%. Meanwhile, comprehensive monitoring could be...
-
High definition Pipette tip - Rapid Gel Clot 1...
Rapid Gel Clot Endotoxin Assay Kit (10 Samples Kit) 1. Product Information Bioendo Rapid Gel Clot Endotoxin Assay Kit is designed to rapidly quantify endotoxin in water or dialysate. Generally, RG kit’s result could be gained within 30 minutes. Under the guidance of detecting endotoxin in water or dialysate quickly, endotoxin detection with Bioendo Rapid Gel Clot Endotoxin Assay Kit does not need the multi steps’ dilution of Control Standard Endotoxin and test samples. Operation procedure...
-
Best quality Kinetic Turbidimetric LAL Test - ...
Kinetic Turbidimetric Amebocyte Lysate Vial 1. Product Introduction Kinetic Turbidimetric Amebocyte Lysate Vial is developed based on the principle that the time needed to reach a certain absorbance increase (onset OD), i.e. onset time, is negatively correlated with the endotoxin concentration. Sensitivity could reach 0.005EU/ml, and the detection could reach four orders of magnitude. It is specially suitable for pharmaceuticals industry to monitor endotoxin concentration. 2. Product Parame...
-
Fast delivery 1000ul Pipette tip - Mini Dry He...
Dry heat incubator single module 1. Product information The Mini Dry Heat Incubator is a micro-processor controlled heating block with semi conductor heating technology.It adapts onboard use, smart, light and convenient for movement, suit for any kind of occasions. Especially good for the incubation of the gel clot LAL assay, LAL chromogenic endpoint assay incubation. 2. Product features 1. Unique designed. Smart and light, convenient movement, suit for various occasions. 2. LCD simultaneou...
-
Professional Design Bacterial Endotoxin Test Us...
Endotoxin Challenge Vials (Endotoxin Indicator) 1. Product Information The Endotoxin Challenge Vial (ECV，Endotoxin Indicator) is used in the validation of dry heat depyrogenation cycles. Endotoxin Challenge Vials are placed in the cold spots of the dry heat oven. After cycle completion, the log reduction in endotoxin levels can be determined by comparing the endotoxin levels in the baked vs not baked Endotoxin Indicators. The Endotoxin Challenge vials are designed to indicate a minimum 3...
-
China OEM Bacterial Endotoxin Test Principle -...
Beta-glucans Blocker for Blocking Beta Glucan Pathway 1. Product information There are two pathway in limulus amoebocyte lysate lal reagent, factor C pathway is specific to endotoxin and factor G pathway is specific to(1,3)- β-D-Glucans. If the test sample contains β-1,3-Glucans, the limulus test (Endotoxin test ) will have interferences. β-G-Blocker blocks the reactivity of LAL to β-1,3-Glucans，conferring increased endotoxin specificity to the LAL test. If the test samples containsβ-1,3-Gl...
